We are proud to introduce the PROCYON TDE 4100 Series, of brilliantly colorful and instrument enhancing preamps. The ardent guitarist and musician can choose from a wide range of signal enhancing preamps that give a clean, crisp boost of up to 40 decibels of pure unhindered sound that shakes hands with your favorite guitar or instrument pickups and complements them.

Most of our designs of Effects Units incorporate “true by-pass circuitry” that allows you to switch freely from effects mode to clean by-pass mode by toggling the stomp box switch. The Stomp Boxes range from a light to medium distortion in some, and from moderate to heavy distortion that is rude but not insulting to the discerning ear. Still others take the Musician to a place where the distortion is extreme to ultra-extreme; a sound that is so outrageous that audiences often comment that they can feel the hair on the back of their necks stands on end! All of our Effects Units are extreme in power, rich in harmonics, and have endless sustain that has been said to seem to be infinite.
We invite you to come to our engineering and sales facilities and listen for yourself. You be the judge and decide which one of our awesome audio products speaks your musical language and conveys your emotions to your listeners.
Audio Products: Features and Facts
Each of our Procyon TDE 4100 series Effects Units are built by hand and all circuit wiring is point-to-point and hand soldered by the Wizard himself. Careful attention is paid to each and every step during the construction process and quality control is paramount from start to finish.
All of our PROCYON TDE 4100 series Effects Units are driven by 100% pure Vacuum Tube Technology. We hand select and test each tube that is to be the heart & soul of each Effects Unit.
Aural Magic happily warrantees your audio product for a period of one year from date of purchase. Tubes are warranted for a period of six months. If you need service or have a question about us, or our products just call 707-441-0700 or 888-999-3111, or email us at LittleBear@Aural-Magic.com.
|
|
|
|
|
PROCYON CUSTOM ELITEAural Magic is thrilled to offer you, our treasured customer, the opportunity to chose and create your own one-of a-kind Stomp Box. You tell us what you desire and our Vacuum Tube Shaman will design it for you. 3D+temporal is the physical boundary, but beyond that is the continuum. That is where our laboratory resides. So contact us when you are ready for the ultimate in special effects. Contact us for details.
707-441-0700 or 888-999-3111
About OrderingPlease call toll free at 888-999-3111 for any questions about the following:
About Ordering PROCYON CUSTOM ELITE |
DYNAMISER TAE 4000PA
The DYNAMISER TAE 4000PA is an exceptional microphone/guitar and instrument preamplifier. The tubes are driven at a full 140 volt DC potential to give them that real lively class A tube sound. The filaments are fed by a filtered DC voltage, thus reducing hum to a minimum. It has been designed around the 6SH7 Sharp-Cutoff Pentode and 6SF5 High-Mu Triode. Both were used widely during the 1940s' and 1950's. They were rugged and reliable and used in military and civilian designs of the era. This preamp ads a unique dynamic sound to your playing and recording endeavors. It has been designed with maximum control and adjustment in mind to allow the user the often needed ability to fine-tune that special one-of-a-kind sound. A simple front panel toggle switch for bass suppression that can roll-off 8 decibels of bass at 300HZ to create a less boomy, more vivid and brighter audio product whether it be your voice or your favorite instrument or guitar. The DYNAMISER TAE 4000 is excellent for voice or music. The input accommodates a 1/4 mono phone connector or a XLR (unbalanced) female connector. The output provides a 1/4 mono phone high out and a low impedance output from a cathode follower. The controls include a microphone input level adjust, first triode stage drive control. The input stage also comes equipped with a panel-top screwdriver adjustable first stage cathode bias potentiometer. This feature allows the audio quality to be honed and tempered. The cathode follower function is controlled by a front panel cathode follower level adjust and a panel-top screwdriver adjustable cathode follower gain trim potentiometer. This allows you to dial-in the right level. There is a vintage jeweled glass pilot light indicator on the panel top to show operational status this adding a subtle nostalgic touch to your equipment stack or studio. Please keep in mind that this preamp model does not contain a phantom power option. The preamp is powered by a 12 volt AC 1.5 amp external wall type transformer. Located on the same rear panel with the ac power input there is a 1 amp fuse.
You may be interested to know that the Vacuum Tube Shaman can create ANY type of audio product you could fancy. We are your source for all audio products such as Boutique Vacuum Tube Effects Units,Stomp Boxes, Distortion Pedals, Compressors/Expandors, Amplifiers,and Preamps.
About Ordering DYNAMISER TAE 4000PA |
SOLARIS AX7S |
DRACO M101 |
DRACO FIREBALL AU7A | |
BLUES COMET |
METEOR RX3 | 



